Posted: Fri May 02, 2008 1:35 pm Post subject: [Asterisk-video] dialing to mcuWeb
Hi,
Thanks Sergio, I got the correct version of xmlrpc and got
everithing compiled. Now I'm trying to connect to a conference.
When I route the call to mcuWeb the log says:
[#|2008-05-02T07:18:40.059-0400|SEVERE|sun-comms-appserver1.0|javax.enterprise.system.container.sip|_ThreadID=47;_ThreadName=SipContainer-serversWorkerThread-5060-6;_RequestID=f5f56ae7-0fbd-4ddc-aec8-cad8090c3ba9;|Exception
allocating servlet
java.lang.NullPointerException
at org.murillo.mcuWeb.ConferenceMngr.getMappedConference(ConferenceMngr.java:174)
at org.murillo.mcuWeb.MCUSipServlet.doInvite(MCUSipServlet.java:77)
at javax.servlet.sip.SipServlet.doRequest(SipServlet.java:54)
at javax.servlet.sip.SipServlet.service(SipServlet.java:43)
That line is:
if(uri.equals(conf.getDID()))
most likely the null object is uri since conf is used just above.
I'm guessing Asterisk is not sending some parameter when connecting to
mcu, but I was unable to find which one.
My dial rule is:
exten => 8000,1,Dial(SIP/AS)
When I try something like
exten => 8000,1,Dial(SIP/AS/555)
mcu fails with incorrect paramete
Does anyone know what I'm doing wrong?
Thanks
Regards
Gonzalo
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
Posted: Fri May 02, 2008 2:52 pm Post subject: [Asterisk-video] dialing to mcuWeb
Hi Gonzalo
First you have to create a conference in the mcuWeb interface and
assigng a did number, then just set up your dialplan to match the did
like this:
exten => 8000,1,Dial(SIP/<did>@AS)
I've made some improvements both the mcuWeb and in the media mixer, I'll
commit them during the weekend and upload a new compiled sar to the
web.
Best regards
Sergio
Gonzalo Merayo escribió:
Quote:
Hi,
Thanks Sergio, I got the correct version of xmlrpc and got
everithing compiled. Now I'm trying to connect to a conference.
When I route the call to mcuWeb the log says:
[#|2008-05-02T07:18:40.059-0400|SEVERE|sun-comms-appserver1.0|javax.enterprise.system.container.sip|_ThreadID=47;_ThreadName=SipContainer-serversWorkerThread-5060-6;_RequestID=f5f56ae7-0fbd-4ddc-aec8-cad8090c3ba9;|Exception
allocating servlet
java.lang.NullPointerException
at org.murillo.mcuWeb.ConferenceMngr.getMappedConference(ConferenceMngr.java:174)
at org.murillo.mcuWeb.MCUSipServlet.doInvite(MCUSipServlet.java:77)
at javax.servlet.sip.SipServlet.doRequest(SipServlet.java:54)
at javax.servlet.sip.SipServlet.service(SipServlet.java:43)
That line is:
if(uri.equals(conf.getDID()))
most likely the null object is uri since conf is used just above.
I'm guessing Asterisk is not sending some parameter when connecting to
mcu, but I was unable to find which one.
My dial rule is:
exten => 8000,1,Dial(SIP/AS)
When I try something like
exten => 8000,1,Dial(SIP/AS/555)
mcu fails with incorrect paramete
Does anyone know what I'm doing wrong?
Thanks
Regards
Gonzalo
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
[#|2008-05-02T10:41:43.600-0400|SEVERE|sun-comms-appserver1.0|global|_ThreadID=49;_ThreadName=SipContainer-serversWorkerThread-5060-1;_RequestID=d065ae08-ab16-4292-a7f0-7a1d17683fb6;|The
log message is null.
org.apache.xmlrpc.common.XmlRpcExtensionException: Null values aren't
supported, if isEnabledForExtensions() == false
at org.apache.xmlrpc.common.TypeFactoryImpl.getSerializer(TypeFactoryImpl.java:115)
at org.apache.xmlrpc.serializer.XmlRpcWriter.writeValue(XmlRpcWriter.java:168)
at org.apache.xmlrpc.serializer.XmlRpcWriter.write(XmlRpcWriter.java:77)
[#|2008-05-02T10:42:24.158-0400|WARNING|sun-comms-appserver1.0|javax.enterprise.system.container.sip|_ThreadID=45;_ThreadName=Thread-29;_RequestID=f33053f2-d508-4d23-84fe-1184e72362b2;|"Failed
get read mutex"|#]
My guessing is that it was unable to connect to mcu mixer server and
thats why it didn't pick up.
Do you recomend I try it with the next binary distro?
I've realized the wiki at mcu has not been used. do you mind if I copy
these findings on it? is there another wiki or doc source up to date?
Thanks
On Fri, May 2, 2008 at 12:46 PM, Sergio Garcia Murillo
<sergio.garcia@fontventa.com> wrote:
Quote:
Hi Gonzalo
First you have to create a conference in the mcuWeb interface and
assigng a did number, then just set up your dialplan to match the did
like this:
exten => 8000,1,Dial(SIP/<did>@AS)
I've made some improvements both the mcuWeb and in the media mixer, I'll
commit them during the weekend and upload a new compiled sar to the
web.
Best regards
Sergio
Gonzalo Merayo escribió:
> Hi,
> Thanks Sergio, I got the correct version of xmlrpc and got
> everithing compiled. Now I'm trying to connect to a conference.
> When I route the call to mcuWeb the log says:
>
> [#|2008-05-02T07:18:40.059-0400|SEVERE|sun-comms-appserver1.0|javax.enterprise.system.container.sip|_ThreadID=47;_ThreadName=SipContainer-serversWorkerThread-5060-6;_RequestID=f5f56ae7-0fbd-4ddc-aec8-cad8090c3ba9;|Exception
> allocating servlet
> java.lang.NullPointerException
> at org.murillo.mcuWeb.ConferenceMngr.getMappedConference(ConferenceMngr.java:174)
> at org.murillo.mcuWeb.MCUSipServlet.doInvite(MCUSipServlet.java:77)
> at javax.servlet.sip.SipServlet.doRequest(SipServlet.java:54)
> at javax.servlet.sip.SipServlet.service(SipServlet.java:43)
>
> That line is:
> if(uri.equals(conf.getDID()))
> most likely the null object is uri since conf is used just above.
>
> I'm guessing Asterisk is not sending some parameter when connecting to
> mcu, but I was unable to find which one.
> My dial rule is:
> exten => 8000,1,Dial(SIP/AS)
>
> When I try something like
> exten => 8000,1,Dial(SIP/AS/555)
> mcu fails with incorrect paramete
>
> Does anyone know what I'm doing wrong?
>
> Thanks
> Regards
>
> Gonzalo
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-video
>
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
Posted: Fri May 02, 2008 5:53 pm Post subject: [Asterisk-video] dialing to mcuWeb
Hi,
Is the media mixer running? Which url have you configured in the mcuWeb for the mixer? What is the log of the mixer when you create the conference?
It should be like http://<ip>:<port>/mcu
Best regards
Sergio
Gonzalo Merayo escribió:
Quote:
Quote:
Hi Sergio,
Thanks, I got it dialing with Dial(SIP/AS/<did>).
Now it dials but doesn't pick up. The log says:
[#|2008-05-02T10:41:43.600-0400|SEVERE|sun-comms-appserver1.0|global|_ThreadID=49;_ThreadName=SipContainer-serversWorkerThread-5060-1;_RequestID=d065ae08-ab16-4292-a7f0-7a1d17683fb6;|The
log message is null.
org.apache.xmlrpc.common.XmlRpcExtensionException: Null values aren't
supported, if isEnabledForExtensions() == false
at org.apache.xmlrpc.common.TypeFactoryImpl.getSerializer(TypeFactoryImpl.java:115)
at org.apache.xmlrpc.serializer.XmlRpcWriter.writeValue(XmlRpcWriter.java:168)
at org.apache.xmlrpc.serializer.XmlRpcWriter.write(XmlRpcWriter.java:77)
[#|2008-05-02T10:42:24.158-0400|WARNING|sun-comms-appserver1.0|javax.enterprise.system.container.sip|_ThreadID=45;_ThreadName=Thread-29;_RequestID=f33053f2-d508-4d23-84fe-1184e72362b2;|"Failed
get read mutex"|#]
My guessing is that it was unable to connect to mcu mixer server and
thats why it didn't pick up.
Do you recomend I try it with the next binary distro?
I've realized the wiki at mcu has not been used. do you mind if I copy
these findings on it? is there another wiki or doc source up to date?
Thanks
On Fri, May 2, 2008 at 12:46 PM, Sergio Garcia Murillo
<sergio.garcia@fontventa.com> (sergio.garcia@fontventa.com) wrote:
Quote:
Hi Gonzalo
First you have to create a conference in the mcuWeb interface and
assigng a did number, then just set up your dialplan to match the did
like this:
exten => 8000,1,Dial(SIP/<did>@AS)
I've made some improvements both the mcuWeb and in the media mixer, I'll
commit them during the weekend and upload a new compiled sar to the
web.
Best regards
Sergio
Gonzalo Merayo escribió:
Quote:
Hi,
> Thanks Sergio, I got the correct version of xmlrpc and got
> everithing compiled. Now I'm trying to connect to a conference.
> When I route the call to mcuWeb the log says:
>
> [#|2008-05-02T07:18:40.059-0400|SEVERE|sun-comms-appserver1.0|javax.enterprise.system.container.sip|_ThreadID=47;_ThreadName=SipContainer-serversWorkerThread-5060-6;_RequestID=f5f56ae7-0fbd-4ddc-aec8-cad8090c3ba9;|Exception
> allocating servlet
> java.lang.NullPointerException
> at org.murillo.mcuWeb.ConferenceMngr.getMappedConference(ConferenceMngr.java:174)
> at org.murillo.mcuWeb.MCUSipServlet.doInvite(MCUSipServlet.java:77)
> at javax.servlet.sip.SipServlet.doRequest(SipServlet.java:54)
> at javax.servlet.sip.SipServlet.service(SipServlet.java:43)
>
> That line is:
> if(uri.equals(conf.getDID()))
> most likely the null object is uri since conf is used just above.
>
> I'm guessing Asterisk is not sending some parameter when connecting to
> mcu, but I was unable to find which one.
> My dial rule is:
> exten => 8000,1,Dial(SIP/AS)
>
> When I try something like
> exten => 8000,1,Dial(SIP/AS/555)
> mcu fails with incorrect paramete
>
> Does anyone know what I'm doing wrong?
>
> Thanks
> Regards
>
> Gonzalo
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-video
>
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
On Fri, May 2, 2008 at 3:47 PM, Sergio Garcia Murillo
<sergio.garcia@fontventa.com> wrote:
Quote:
Hi,
Is the media mixer running? Which url have you configured in the mcuWeb for
the mixer? What is the log of the mixer when you create the conference?
It should be like http://<ip>:<port>/mcu
Best regards
Sergio
Gonzalo Merayo escribió:
Hi Sergio,
Thanks, I got it dialing with Dial(SIP/AS/<did>).
Now it dials but doesn't pick up. The log says:
[#|2008-05-02T10:41:43.600-0400|SEVERE|sun-comms-appserver1.0|global|_ThreadID=49;_ThreadName=SipContainer-serversWorkerThread-5060-1;_RequestID=d065ae08-ab16-4292-a7f0-7a1d17683fb6;|The
log message is null.
org.apache.xmlrpc.common.XmlRpcExtensionException: Null values aren't
supported, if isEnabledForExtensions() == false
at
org.apache.xmlrpc.common.TypeFactoryImpl.getSerializer(TypeFactoryImpl.java:115)
at
org.apache.xmlrpc.serializer.XmlRpcWriter.writeValue(XmlRpcWriter.java:168)
at org.apache.xmlrpc.serializer.XmlRpcWriter.write(XmlRpcWriter.java:77)
[#|2008-05-02T10:42:24.158-0400|WARNING|sun-comms-appserver1.0|javax.enterprise.system.container.sip|_ThreadID=45;_ThreadName=Thread-29;_RequestID=f33053f2-d508-4d23-84fe-1184e72362b2;|"Failed
get read mutex"|#]
My guessing is that it was unable to connect to mcu mixer server and
thats why it didn't pick up.
Do you recomend I try it with the next binary distro?
I've realized the wiki at mcu has not been used. do you mind if I copy
these findings on it? is there another wiki or doc source up to date?
Thanks
On Fri, May 2, 2008 at 12:46 PM, Sergio Garcia Murillo
<sergio.garcia@fontventa.com> wrote:
Hi Gonzalo
First you have to create a conference in the mcuWeb interface and
assigng a did number, then just set up your dialplan to match the did
like this:
exten => 8000,1,Dial(SIP/<did>@AS)
I've made some improvements both the mcuWeb and in the media mixer, I'll
commit them during the weekend and upload a new compiled sar to the
web.
Best regards
Sergio
Gonzalo Merayo escribió:
Hi,
> Thanks Sergio, I got the correct version of xmlrpc and got
> everithing compiled. Now I'm trying to connect to a conference.
> When I route the call to mcuWeb the log says:
>
>
[#|2008-05-02T07:18:40.059-0400|SEVERE|sun-comms-appserver1.0|javax.enterprise.system.container.sip|_ThreadID=47;_ThreadName=SipContainer-serversWorkerThread-5060-6;_RequestID=f5f56ae7-0fbd-4ddc-aec8-cad8090c3ba9;|Exception
> allocating servlet
> java.lang.NullPointerException
> at
org.murillo.mcuWeb.ConferenceMngr.getMappedConference(ConferenceMngr.java:174)
> at org.murillo.mcuWeb.MCUSipServlet.doInvite(MCUSipServlet.java:77)
> at javax.servlet.sip.SipServlet.doRequest(SipServlet.java:54)
> at javax.servlet.sip.SipServlet.service(SipServlet.java:43)
>
> That line is:
> if(uri.equals(conf.getDID()))
> most likely the null object is uri since conf is used just above.
>
> I'm guessing Asterisk is not sending some parameter when connecting to
> mcu, but I was unable to find which one.
> My dial rule is:
> exten => 8000,1,Dial(SIP/AS)
>
> When I try something like
> exten => 8000,1,Dial(SIP/AS/555)
> mcu fails with incorrect paramete
>
> Does anyone know what I'm doing wrong?
>
> Thanks
> Regards
>
> Gonzalo
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-video
>
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
Posted: Mon May 05, 2008 5:31 pm Post subject: [Asterisk-video] dialing to mcuWeb
Hello,
I'm trying to connect to mcuWeb and the server doesn't pick up.
The only error on the log is this one:
[#|2008-05-05T11:11:42.906-0400|SEVERE|sun-comms-appserver1.0|global|_ThreadID=52;_ThreadName=SipContainer-serversWorkerThread-5060-4;_RequestID=8bc29df2-794f-499a-ae78-66574cd57348;|The
log message is null.
org.apache.xmlrpc.common.XmlRpcExtensionException: Null values aren't
supported, if isEnabledForExtensions() == false
at org.apache.xmlrpc.common.TypeFactoryImpl.getSerializer(TypeFactoryImpl.java:115)
at org.apache.xmlrpc.serializer.XmlRpcWriter.writeValue(XmlRpcWriter.java:168)
at org.apache.xmlrpc.serializer.XmlRpcWriter.write(XmlRpcWriter.java:77)
at org.apache.xmlrpc.client.XmlRpcStreamTransport$ReqWriterImpl.write(XmlRpcStreamTransport.java:67)
at org.apache.xmlrpc.client.XmlRpcHttpTransport$ByteArrayReqWriter.<init>(XmlRpcHttpTransport.java:23)
at org.apache.xmlrpc.client.XmlRpcHttpTransport.newReqWriter(XmlRpcHttpTransport.java:106)
at org.apache.xmlrpc.client.XmlRpcStreamTransport.sendRequest(XmlRpcStreamTransport.java:139)
at org.apache.xmlrpc.client.XmlRpcHttpTransport.sendRequest(XmlRpcHttpTransport.java:94)
at org.apache.xmlrpc.client.XmlRpcSunHttpTransport.sendRequest(XmlRpcSunHttpTransport.java:44)
at org.apache.xmlrpc.client.XmlRpcClientWorker.execute(XmlRpcClientWorker.java:53)
at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:166)
at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:136)
at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:125)
at org.murillo.mcu.XmlRpcMcuClient.SetVideoCodec(XmlRpcMcuClient.java:137)
at org.murillo.mcuWeb.ConferenceMngr.joinParticipant(ConferenceMngr.java:145)
¿Could you tell me if it's important or if I should somewhere else?
Thanks!
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
Posted: Mon May 05, 2008 8:06 pm Post subject: [Asterisk-video] dialing to mcuWeb
Solved, partially.
I modified the code to scream when a parameter at SetVideoCodec is
null and found I was missing codecs.
Now MCU is logging this error:
[30280]RecVideoThread [30280]
[30280]>RecVideo
[30280]Silence
[30280]Error recv video [0]
[30280]Silence
[30280]Error recv video [0]
On Mon, May 5, 2008 at 3:23 PM, Gonzalo Merayo <merayo@gmail.com> wrote:
Quote:
Hello,
I'm trying to connect to mcuWeb and the server doesn't pick up.
The only error on the log is this one:
log message is null.
org.apache.xmlrpc.common.XmlRpcExtensionException: Null values aren't
supported, if isEnabledForExtensions() == false
at org.apache.xmlrpc.common.TypeFactoryImpl.getSerializer(TypeFactoryImpl.java:115)
at org.apache.xmlrpc.serializer.XmlRpcWriter.writeValue(XmlRpcWriter.java:168)
at org.apache.xmlrpc.serializer.XmlRpcWriter.write(XmlRpcWriter.java:77)
at org.apache.xmlrpc.client.XmlRpcStreamTransport$ReqWriterImpl.write(XmlRpcStreamTransport.java:67)
at org.apache.xmlrpc.client.XmlRpcHttpTransport$ByteArrayReqWriter.<init>(XmlRpcHttpTransport.java:23)
at org.apache.xmlrpc.client.XmlRpcHttpTransport.newReqWriter(XmlRpcHttpTransport.java:106)
at org.apache.xmlrpc.client.XmlRpcStreamTransport.sendRequest(XmlRpcStreamTransport.java:139)
at org.apache.xmlrpc.client.XmlRpcHttpTransport.sendRequest(XmlRpcHttpTransport.java:94)
at org.apache.xmlrpc.client.XmlRpcSunHttpTransport.sendRequest(XmlRpcSunHttpTransport.java:44)
at org.apache.xmlrpc.client.XmlRpcClientWorker.execute(XmlRpcClientWorker.java:53)
at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:166)
at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:136)
at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:125)
at org.murillo.mcu.XmlRpcMcuClient.SetVideoCodec(XmlRpcMcuClient.java:137)
at org.murillo.mcuWeb.ConferenceMngr.joinParticipant(ConferenceMngr.java:145)
¿Could you tell me if it's important or if I should somewhere else?
Thanks!
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
Posted: Tue May 06, 2008 6:58 am Post subject: [Asterisk-video] dialing to mcuWeb
It's because the media mixer is not receiving rtp video or audio data.
Which IP is the one that you have configured on the mcuWeb for the mixer? That ip is the one that is going to be set in the SDP sent to asterisk.
Check it an try to find where is asterisk sending the rtp data.. :)
A SIP trace, media mixer log and ethereal dump would be of much help here.
Best regards
Sergio
----- Original Message -----
From: Gonzalo Merayo [mailto:merayo@gmail.com]
To: asterisk-video@lists.digium.com
Sent: Mon, 5 May 2008 17:59:22 -0300
Subject: Re: [Asterisk-video] dialing to mcuWeb
Solved, partially.
I modified the code to scream when a parameter at SetVideoCodec is
null and found I was missing codecs.
Now MCU is logging this error:
[30280]RecVideoThread [30280]
[30280]>RecVideo
[30280]Silence
[30280]Error recv video [0]
[30280]Silence
[30280]Error recv video [0]
On Mon, May 5, 2008 at 3:23 PM, Gonzalo Merayo <merayo@gmail.com> wrote:
Quote:
Hello,
I'm trying to connect to mcuWeb and the server doesn't pick up.
The only error on the log is this one:
log message is null.
org.apache.xmlrpc.common.XmlRpcExtensionException: Null values aren't
supported, if isEnabledForExtensions() == false
at org.apache.xmlrpc.common.TypeFactoryImpl.getSerializer(TypeFactoryImpl.java:115)
at org.apache.xmlrpc.serializer.XmlRpcWriter.writeValue(XmlRpcWriter.java:168)
at org.apache.xmlrpc.serializer.XmlRpcWriter.write(XmlRpcWriter.java:77)
at org.apache.xmlrpc.client.XmlRpcStreamTransport$ReqWriterImpl.write(XmlRpcStreamTransport.java:67)
at org.apache.xmlrpc.client.XmlRpcHttpTransport$ByteArrayReqWriter.<init>(XmlRpcHttpTransport.java:23)
at org.apache.xmlrpc.client.XmlRpcHttpTransport.newReqWriter(XmlRpcHttpTransport.java:106)
at org.apache.xmlrpc.client.XmlRpcStreamTransport.sendRequest(XmlRpcStreamTransport.java:139)
at org.apache.xmlrpc.client.XmlRpcHttpTransport.sendRequest(XmlRpcHttpTransport.java:94)
at org.apache.xmlrpc.client.XmlRpcSunHttpTransport.sendRequest(XmlRpcSunHttpTransport.java:44)
at org.apache.xmlrpc.client.XmlRpcClientWorker.execute(XmlRpcClientWorker.java:53)
at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:166)
at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:136)
at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:125)
at org.murillo.mcu.XmlRpcMcuClient.SetVideoCodec(XmlRpcMcuClient.java:137)
at org.murillo.mcuWeb.ConferenceMngr.joinParticipant(ConferenceMngr.java:145)
¿Could you tell me if it's important or if I should somewhere else?
Thanks!
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
Posted: Tue May 06, 2008 11:15 am Post subject: [Asterisk-video] dialing to mcuWeb
Sergio,
You are right, I had set it up for 127.0.0.1 but asterisk is
running on another server. Thanks!
I'm running the media mixer and the mcuWeb on the same machine.
Could that also be a problem? (like both taking 5600?)
Regards
On Tue, May 6, 2008 at 4:51 AM, Sergio Garcia Murillo
<sergio.garcia@fontventa.com> wrote:
Quote:
It's because the media mixer is not receiving rtp video or audio data.
Which IP is the one that you have configured on the mcuWeb for the mixer? That ip is the one that is going to be set in the SDP sent to asterisk.
Check it an try to find where is asterisk sending the rtp data.. :)
A SIP trace, media mixer log and ethereal dump would be of much help here.
Best regards
Sergio
----- Original Message -----
From: Gonzalo Merayo [mailto:merayo@gmail.com]
To: asterisk-video@lists.digium.com
Sent: Mon, 5 May 2008 17:59:22 -0300
Subject: Re: [Asterisk-video] dialing to mcuWeb
Solved, partially.
I modified the code to scream when a parameter at SetVideoCodec is
null and found I was missing codecs.
Now MCU is logging this error:
[30280]RecVideoThread [30280]
[30280]>RecVideo
[30280]Silence
[30280]Error recv video [0]
[30280]Silence
[30280]Error recv video [0]
On Mon, May 5, 2008 at 3:23 PM, Gonzalo Merayo <merayo@gmail.com> wrote:
> Hello,
> I'm trying to connect to mcuWeb and the server doesn't pick up.
> The only error on the log is this one:
>
> [#|2008-05-05T11:11:42.906-0400|SEVERE|sun-comms-appserver1.0|global|_ThreadID=52;_ThreadName=SipContainer-serversWorkerThread-5060-4;_RequestID=8bc29df2-794f-499a-ae78-66574cd57348;|The
>
> log message is null.
> org.apache.xmlrpc.common.XmlRpcExtensionException: Null values aren't
> supported, if isEnabledForExtensions() == false
> at org.apache.xmlrpc.common.TypeFactoryImpl.getSerializer(TypeFactoryImpl.java:115)
> at org.apache.xmlrpc.serializer.XmlRpcWriter.writeValue(XmlRpcWriter.java:168)
> at org.apache.xmlrpc.serializer.XmlRpcWriter.write(XmlRpcWriter.java:77)
> at org.apache.xmlrpc.client.XmlRpcStreamTransport$ReqWriterImpl.write(XmlRpcStreamTransport.java:67)
> at org.apache.xmlrpc.client.XmlRpcHttpTransport$ByteArrayReqWriter.<init>(XmlRpcHttpTransport.java:23)
> at org.apache.xmlrpc.client.XmlRpcHttpTransport.newReqWriter(XmlRpcHttpTransport.java:106)
> at org.apache.xmlrpc.client.XmlRpcStreamTransport.sendRequest(XmlRpcStreamTransport.java:139)
> at org.apache.xmlrpc.client.XmlRpcHttpTransport.sendRequest(XmlRpcHttpTransport.java:94)
> at org.apache.xmlrpc.client.XmlRpcSunHttpTransport.sendRequest(XmlRpcSunHttpTransport.java:44)
> at org.apache.xmlrpc.client.XmlRpcClientWorker.execute(XmlRpcClientWorker.java:53)
> at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:166)
> at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:136)
> at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:125)
> at org.murillo.mcu.XmlRpcMcuClient.SetVideoCodec(XmlRpcMcuClient.java:137)
> at org.murillo.mcuWeb.ConferenceMngr.joinParticipant(ConferenceMngr.java:145)
>
> ¿Could you tell me if it's important or if I should somewhere else?
>
> Thanks!
>
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
Posted: Tue May 06, 2008 11:29 am Post subject: [Asterisk-video] dialing to mcuWeb
Never mind. I restarted mcuWeb and started working, sory.
I'm getting many
[h263 @ 0xb7e30610]vbv buffer overflow
And the mixed video has many problems. (see attach)
Are these known bugs?
I'll try other codecs...
On Tue, May 6, 2008 at 9:05 AM, Gonzalo Merayo <merayo@gmail.com> wrote:
Quote:
Sergio,
You are right, I had set it up for 127.0.0.1 but asterisk is
running on another server. Thanks!
I'm running the media mixer and the mcuWeb on the same machine.
Could that also be a problem? (like both taking 5600?)
Regards
On Tue, May 6, 2008 at 4:51 AM, Sergio Garcia Murillo
<sergio.garcia@fontventa.com> wrote:
> It's because the media mixer is not receiving rtp video or audio data.
> Which IP is the one that you have configured on the mcuWeb for the mixer? That ip is the one that is going to be set in the SDP sent to asterisk.
>
> Check it an try to find where is asterisk sending the rtp data.. :)
>
> A SIP trace, media mixer log and ethereal dump would be of much help here.
>
> Best regards
> Sergio
>
>
>
> ----- Original Message -----
> From: Gonzalo Merayo [mailto:merayo@gmail.com]
> To: asterisk-video@lists.digium.com
> Sent: Mon, 5 May 2008 17:59:22 -0300
> Subject: Re: [Asterisk-video] dialing to mcuWeb
>
> Solved, partially.
> I modified the code to scream when a parameter at SetVideoCodec is
> null and found I was missing codecs.
>
> Now MCU is logging this error:
> [30280]RecVideoThread [30280]
> [30280]>RecVideo
> [30280]Silence
> [30280]Error recv video [0]
> [30280]Silence
> [30280]Error recv video [0]
>
> On Mon, May 5, 2008 at 3:23 PM, Gonzalo Merayo <merayo@gmail.com> wrote:
> > Hello,
> > I'm trying to connect to mcuWeb and the server doesn't pick up.
> > The only error on the log is this one:
> >
> > [#|2008-05-05T11:11:42.906-0400|SEVERE|sun-comms-appserver1.0|global|_ThreadID=52;_ThreadName=SipContainer-serversWorkerThread-5060-4;_RequestID=8bc29df2-794f-499a-ae78-66574cd57348;|The
> >
> > log message is null.
> > org.apache.xmlrpc.common.XmlRpcExtensionException: Null values aren't
> > supported, if isEnabledForExtensions() == false
> > at org.apache.xmlrpc.common.TypeFactoryImpl.getSerializer(TypeFactoryImpl.java:115)
> > at org.apache.xmlrpc.serializer.XmlRpcWriter.writeValue(XmlRpcWriter.java:168)
> > at org.apache.xmlrpc.serializer.XmlRpcWriter.write(XmlRpcWriter.java:77)
> > at org.apache.xmlrpc.client.XmlRpcStreamTransport$ReqWriterImpl.write(XmlRpcStreamTransport.java:67)
> > at org.apache.xmlrpc.client.XmlRpcHttpTransport$ByteArrayReqWriter.<init>(XmlRpcHttpTransport.java:23)
> > at org.apache.xmlrpc.client.XmlRpcHttpTransport.newReqWriter(XmlRpcHttpTransport.java:106)
> > at org.apache.xmlrpc.client.XmlRpcStreamTransport.sendRequest(XmlRpcStreamTransport.java:139)
> > at org.apache.xmlrpc.client.XmlRpcHttpTransport.sendRequest(XmlRpcHttpTransport.java:94)
> > at org.apache.xmlrpc.client.XmlRpcSunHttpTransport.sendRequest(XmlRpcSunHttpTransport.java:44)
> > at org.apache.xmlrpc.client.XmlRpcClientWorker.execute(XmlRpcClientWorker.java:53)
> > at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:166)
> > at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:136)
> > at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:125)
> > at org.murillo.mcu.XmlRpcMcuClient.SetVideoCodec(XmlRpcMcuClient.java:137)
> > at org.murillo.mcuWeb.ConferenceMngr.joinParticipant(ConferenceMngr.java:145)
> >
> > ¿Could you tell me if it's important or if I should somewhere else?
> >
> > Thanks!
> >
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-video
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-video
>
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
Posted: Mon May 19, 2008 11:36 am Post subject: [Asterisk-video] dialing to mcuWeb
Hi Gonzalo,
I've just commited some changes in MediaMixer and update the mcuWeb binary to the latest svn version.
Could you check it and see if it still happens?
Best regards
Sergio
----- Original Message -----
From: Gonzalo Merayo [mailto:merayo@gmail.com]
To: asterisk-video@lists.digium.com
Sent: Tue, 6 May 2008 09:21:50 -0300
Subject: Re: [Asterisk-video] dialing to mcuWeb
Never mind. I restarted mcuWeb and started working, sory.
I'm getting many
[h263 @ 0xb7e30610]vbv buffer overflow
And the mixed video has many problems. (see attach)
Are these known bugs?
I'll try other codecs...
On Tue, May 6, 2008 at 9:05 AM, Gonzalo Merayo <merayo@gmail.com> wrote:
Quote:
Sergio,
You are right, I had set it up for 127.0.0.1 but asterisk is
running on another server. Thanks!
I'm running the media mixer and the mcuWeb on the same machine.
Could that also be a problem? (like both taking 5600?)
Regards
On Tue, May 6, 2008 at 4:51 AM, Sergio Garcia Murillo
<sergio.garcia@fontventa.com> wrote:
> It's because the media mixer is not receiving rtp video or audio data.
> Which IP is the one that you have configured on the mcuWeb for the mixer? That ip is the one that is going to be set in the SDP sent to asterisk.
>
> Check it an try to find where is asterisk sending the rtp data.. :)
>
> A SIP trace, media mixer log and ethereal dump would be of much help here.
>
> Best regards
> Sergio
>
>
>
> ----- Original Message -----
> From: Gonzalo Merayo [mailto:merayo@gmail.com]
> To: asterisk-video@lists.digium.com
> Sent: Mon, 5 May 2008 17:59:22 -0300
> Subject: Re: [Asterisk-video] dialing to mcuWeb
>
> Solved, partially.
> I modified the code to scream when a parameter at SetVideoCodec is
> null and found I was missing codecs.
>
> Now MCU is logging this error:
> [30280]RecVideoThread [30280]
> [30280]>RecVideo
> [30280]Silence
> [30280]Error recv video [0]
> [30280]Silence
> [30280]Error recv video [0]
>
> On Mon, May 5, 2008 at 3:23 PM, Gonzalo Merayo <merayo@gmail.com> wrote:
> > Hello,
> > I'm trying to connect to mcuWeb and the server doesn't pick up.
> > The only error on the log is this one:
> >
> > [#|2008-05-05T11:11:42.906-0400|SEVERE|sun-comms-appserver1.0|global|_ThreadID=52;_ThreadName=SipContainer-serversWorkerThread-5060-4;_RequestID=8bc29df2-794f-499a-ae78-66574cd57348;|The
> >
> > log message is null.
> > org.apache.xmlrpc.common.XmlRpcExtensionException: Null values aren't
> > supported, if isEnabledForExtensions() == false
> > at org.apache.xmlrpc.common.TypeFactoryImpl.getSerializer(TypeFactoryImpl.java:115)
> > at org.apache.xmlrpc.serializer.XmlRpcWriter.writeValue(XmlRpcWriter.java:168)
> > at org.apache.xmlrpc.serializer.XmlRpcWriter.write(XmlRpcWriter.java:77)
> > at org.apache.xmlrpc.client.XmlRpcStreamTransport$ReqWriterImpl.write(XmlRpcStreamTransport.java:67)
> > at org.apache.xmlrpc.client.XmlRpcHttpTransport$ByteArrayReqWriter.<init>(XmlRpcHttpTransport.java:23)
> > at org.apache.xmlrpc.client.XmlRpcHttpTransport.newReqWriter(XmlRpcHttpTransport.java:106)
> > at org.apache.xmlrpc.client.XmlRpcStreamTransport.sendRequest(XmlRpcStreamTransport.java:139)
> > at org.apache.xmlrpc.client.XmlRpcHttpTransport.sendRequest(XmlRpcHttpTransport.java:94)
> > at org.apache.xmlrpc.client.XmlRpcSunHttpTransport.sendRequest(XmlRpcSunHttpTransport.java:44)
> > at org.apache.xmlrpc.client.XmlRpcClientWorker.execute(XmlRpcClientWorker.java:53)
> > at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:166)
> > at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:136)
> > at org.apache.xmlrpc.client.XmlRpcClient.execute(XmlRpcClient.java:125)
> > at org.murillo.mcu.XmlRpcMcuClient.SetVideoCodec(XmlRpcMcuClient.java:137)
> > at org.murillo.mcuWeb.ConferenceMngr.joinParticipant(ConferenceMngr.java:145)
> >
> > ¿Could you tell me if it's important or if I should somewhere else?
> >
> > Thanks!
> >
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-video
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-video mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-video
>
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum