zaptel.conf (in progress)

6.46. zaptel.conf (in progress)

The file is located in the /etc/ directory.

For PRI cards, have a look here:
For TDM cards, have a look here:

User Comments

Daniel Ward (dward at connextions dot com)
23 September 2007 00:58:19
Mike, I suggest you check with your co and ensure that the D-Channel is definately on 48, i had an interesting problem with a t where for some reason the dchannel was on 1 and not 24.

jay vaidya (jvaidya at varaha dot com)
13 September 2007 14:43:16
i got error " 66 channnel not found " also not get dial tone on my analog telephone device...

Daniel Ward (dward at connextions dot com)
04 September 2007 18:28:18
Check your zaptel modules, run the command ztcfg -vvvvvvvvvv.

Double check you have appropriately loaded zaptel, modprobe zaptelversion. Double check you have loaded the appropriate drivers for the card modprobe wcte##xp

Mike Lord (mxtreme311 at mac dot com)
05 February 2007 19:11:13
I have a PRI and a regular outbound only T-1 I'm trying to configure on my 2 port TE205P, the regular T-1 has E&M Wink signalling, and the PRI has

zaptel.conf:
span=1,1,0,esf,b8zs
span=2,1,0,esf,b8zs
e&m=1-24
bchan = 25-47
dchan = 48
loadzone=us
defaultzone=us

zapata.conf:
[channels]
group=1
language=en
signalling=em_w
usecallerid=yes
callerid=asreceived
context=default
echocancel=64
echocancelwhenbridged=yes
rxgain=1.0
txgain=1.0
channel => 1-24

group=3
language=en
switchtype=dms100
signalling=pri_cpe
usecallerid=yes
callerid=asreceived
context=default
echocancel=64
echocancelwhenbridged=yes
rxgain=1.0
txgain=1.0
channel => 25-47

But my CLI is outputting this almost every few seconds:
== pri_find_dchan: No D-channels available! Using Primary channel 48 as D-channel anyway!
== Primary D-Channel on span 2 up

Does anyone know if I have a config problem or a problem with my Telco? We have 4 other PRI circuits on 3 other asterisk servers and I'm not seeing these errors, but this is the only server that has a LD T-1 and a PRI on the same card.

dayabanta.s (dayabanta dot s at entl dot net)
18 July 2006 12:06:07
how do i configure the analog phone through asterisk.
thanks
dayabanta.s

Add Comment

Latest Headlines:

T.38 faxing with Zoiper 2.15 is now easier than ever
section: voip software
Asterisk 1.4.21 Released
section: Asterisk
Asterisk 1.4.20 Released
section: Asterisk
Asterisk 1.4.20-rc2 Released
section: Asterisk
Asterisk 1.4.20-rc1 Now Available
section: Asterisk
News Archives (older news)

Latest Tutorials:

VMAuthenticate (dialplan application)
added 01/Mar/2008 15:57
Siptronic ST-530
added 06/Nov/2007 17:57
Siemens C455 IP hardphone
added 05/Nov/2007 10:24
Zoiper
added 22/Oct/2007 17:53
Grandstream GXP-2020
added 15/Oct/2007 18:17

Latest Comments:

I have download X-LITE but strangely , w...
tutorial: X-Lite - SIP softphone
Hello i can receive a call from outside ...
tutorial: X-Lite - SIP softphone
Hello, we are Howking Technology Co. Ltd...
section: technology
msneyi açmak istiyorum...
tutorial: Microsoft Windows Messenger 5.1
i just install X lit and i dont know how...
tutorial: X-Lite - SIP softphone

Name:
Email:
Comment:
In order to prevent automatic posting on our website, we kindly request you to type in the number you see in the picture below.
Image Verification: