Posted: Mon Mar 26, 2007 7:17 pm Post subject: [asterisk-speech-rec] Pizza Demo Problems CRM:00170876
Ed,
Can you please send your extensions.conf, your extensions_custom.conf, and your pizza_demo.conf files?
With a trixbox, it may just be a routing problem, in that there is a conflict with what you've done in FreePBX and what exists in your extensions files.
Stephen Keller
LumenVox Technical Support
P: 877-977-0707, just say "Stephen Keller" or "Support"
F: 858-707-7072
support@LumenVox.com www.LumenVox.com
I recently purchased the Lumenvox single port speech engine for my TrixBox 2.0 system. I am unable to get the pizza demo working. I will admit I am a Asterisk/Lumenvox newb, but I have spent a fair amount of the weekend searching for a solution before I decided to post. Here is where I am at so far, any (and all) suggestions appreciated, thanks!
I downloaded the files per the Trixbox instructions (http://www.lumenvox.com/customers/help/trixbox.htm) and everything, including the license process, seemed to install just fine – no errors reported.
I used the following bins:
LumenvoxSRE-7.1.211-rh-es.tar
asterisk-1.2.x-lumenvox-support-b10-engine7.1.tar
license_server-7.1.211-rh-es.tar
I am able to build and run the demo app at optlumenvoxengine_7.1examples and when running I get :
[root@asterisk1 examples]# ./example 127.0.0.1
Connecting to 127.0.0.1
Interpretation 1:
8587070707
count=0, decode returns 10
Interpretation 1:
8587070707
count=1, decode returns 10
Interpretation 1:
8587070707
…..
So it seems that the speech engine is up and running ok.
In one of the docs, it mentions the default extension is 200, I had an existing extension at 200, but deleted it so that is the only conflict I can come up with, and wanted to make sure I shared this in case this could be the problem.
I also created an IVR route to the demo and have configured it to run ‘Custom App’ custom-pizza,s,1.
When I dial the extension from the IVR, here is what the Asterisk debug shows me (verbosity 9):
-- Playing 'custom/EnterExt1' (language 'en')
== CDR updated on SIP/edh-XXX
-- Executing DBdel("SIP/edh-XXX", "") in new stack
-- Executing Set("SIP/edh-XXX", "__NODEST=") in new stack
-- Executing Goto("SIP/edh-XXX", "custom-pizza|s|1") in new stack
-- Goto (custom-pizza,s,1)
I then get a reorder (fast busy) tone, and asterisk hangs up, and the logging stops.
Not sure if this helps or not, but here is the output from loading grammar:
I have also made sure all the Trixbox and pertinent modules have the latest online updates. I hope I included all the right information here. If anyone has a suggestion, please let me know. Thanks for the help!
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum