However I am able to connect to my server the command h324m_gw_answer when executed. it remain in that state only and not proceeding to next step. after few minutes I need to hang the call.
below is my asterisk log
Going to extension s|1 because of immediate=yes
-- Accepting call from '9xxxxxxxxx' to 's' on channel 0/11, span 1
-- Executing [s@incoming:1] Answer("Zap/11-1", "") in new stack
-- Executing [s@incoming:2] h324m_gw("Zap/11-1", "1@vxml") in new stack
-- Executing [1@vxml:1] h324m_gw_answer("Local/1@vxml-768d,2", "") in new stack
Quote:
I want to know how long it will take for 3G negotiation or is there any other issue.
However I am able to connect to my server the command
h324m_gw_answer when executed. it remain in that state only and not
proceeding to next step. after few minutes I need to hang the call.
below is my asterisk log
Going to extension s|1 because of immediate=yes
-- Accepting call from '9xxxxxxxxx' to 's' on channel 0/11, span 1
-- Executing [s@incoming:1] Answer("Zap/11-1", "") in new stack
-- Executing [s@incoming:2] h324m_gw("Zap/11-1", "1@vxml") in new
stack
-- Executing [1@vxml:1] h324m_gw_answer("Local/1@vxml-768d,2",
"") in new stack
I want to know how long it will take for 3G negotiation or is there
any other issue.
Posted: Fri Mar 06, 2009 4:09 am Post subject: [Asterisk-video] Regd: command stops executing
Hi Klaus,
Its working now I can see the video but audio is not coming. In asterisk log its saying.
"NOTICE[5485]: channel.c:2272 __ast_read: Dropping incompatible voice frame on Local/1@vxml-d45b,1 of format ulaw since our native format has changed to unknown"
my video file codec are as below.
mp4info version 1.5.0.1
xxxx.3gp:
Track Type Info
1 audio G.711 uLaw, 3.640 secs, 64 kbps, 8000 Hz
2 hint Payload PCMU for track 1
3 video H.263, 1.234 secs, 200 kbps, 176x144 @ 29.983793 fps
4 hint Payload H263-2000 for track 3
Metadata Tool: mp4creator 1.5.0.1
Another issue is I am trying to connect my asterisk server locally with my nokia N81 (version:v 10.0.0.35 RM-223) using wlan but I am getting registration failure error.
Below are my sip setting for the mobile as many mentioned in different sites that it works.
profilename:SIPtest.
serviceprofile:IETF
Default access point: <mywifipoint>
public user name: xxxx@<asteriskserverIP>
use compression: No
Registration: Always on
Use Security: No
Proxy server
proxy server address:192.168.x.x<asterisk server IP>
Realm: asterisk
UserName:xxxx
Password:xxxx123
Allow loose routing: yes
Transport type: UDP
Port:5060
Registrar server address
registrar server address:192.168.x.x<asterisk serverIP>
Realm: asterisk
UserName:xxxx
Password:xxxx123
Allow loose routing: yes
Transport type: UDP
Port:5060
then I created profile in internet telephone with the above sip setting.
Do I need to install updates for the mobile and software like SIPVOIP setting software.
I am sorry if the above issue not related to the forum. please discard it.[/url]
post the asterisk console during an incoming call with
> pri debug span 1 (or whatever span you use)
> set verbose 9
> set debug 9
regards
klaus
jack nicolson schrieb:
Quote:
Hi,
>
> Just now in my city 3g service is implemented so I started looking
> for IVVR stuff. Anyway my asterisk video issue is.
>
>
> I followed your instruction for video call as given below.
>
> [url=http://www.allasterisk.com/lists/asterisk-video@lists.digium.com/2007-09/msg00125.html]http://www.allasterisk.com/lists/asterisk-video@lists.digium.com/2007-09/msg00125.html
>
>
> However I am able to connect to my server the command
> h324m_gw_answer when executed. it remain in that state only and not
> proceeding to next step. after few minutes I need to hang the call.
>
>
> below is my asterisk log
>
> Going to extension s|1 because of immediate=yes
> -- Accepting call from '9xxxxxxxxx' to 's' on channel 0/11, span 1
> -- Executing [s@incoming:1] Answer("Zap/11-1", "") in new stack
> -- Executing [s@incoming:2] h324m_gw("Zap/11-1", "1@vxml") in new
> stack
> -- Executing [1@vxml:1] h324m_gw_answer("Local/1@vxml-768d,2",
> "") in new stack
>
>
>
> I want to know how long it will take for 3G negotiation or is there
> any other issue.
>
>
> I am connected to PRI E1 line
>
> Thanks,
>
> Jack
>
>
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum