Posted: Fri May 29, 2009 1:27 am Post subject: [asterisk-dev] Feature request: Ability to assign which nic
On Thu, 28 May 2009, David Backeberg wrote:
On Thu, May 28, 2009 at 4:08 AM, Kaloyan Kovachev <email@example.com> wrote:
> If each trunk is using diferent router IP - you don't need any changes in
> Asterisk, but configuring the routing on the machine.
> trunk 1 uses src IP 220.127.116.11 on eth0 and router 18.104.22.168
> trunk 2 uses src IP 22.214.171.124(but the same as on eth0 will also work) on eth1
> and router 126.96.36.199
> ip a a dev eth0 188.8.131.52
> ip a a dev eth1 184.108.40.206
> ip r a 220.127.116.11 dev eth0 src 18.104.22.168
> ip r a 22.214.171.124 dev eth1 src 126.96.36.199
> with this setup Asterisk will pickup the outgoing IP for each trunk properly
This is true, and you can of course make this dramatically more
complicated by adding more physical NICs, or virts on the same system,
or ethernet bridging techniques.
I am guessing this won't help the OP, as he describes registering to the
device on his network (otherwise the MAC wouldn't matter). There is only
one of them, and must assume only one IP. There is no way for the routing
layer to know which MAC should handle the outbound packet, as the
determining factor is actually in the application layer.
I second that you are trying to solve a solveable problem using a much
harder approach than what to me and the other poster is the obvious
solution already supported by asterisk.
I don't know that there is a solution already in asterisk, but the bottom
line is code gets written by frustrated programmers. It will be hard to
find someone on this list that is frustrated with this particular problem
because none of us actually have to deal with it. One of NTT's customers
will have to step up to the plate, probably, as I cannot really think of
any other use for this patch. The multipath example perhaps, but anyone
needing that is probably already using routing equipment to solve that
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum